Matching the Texture Around a Repair
A patch is only finished when you can't find it. On a textured wall or ceiling that means rebuilding the pattern over the patch and a margin around it, then priming and painting the whole area. These are the textures a contractor is usually asked to match.

Knockdown Walls and Ceilings Around a Patch
Knockdown starts as sprayed splatter, and a wide knife then flattens the peaks. HomeGuide calls it the most common drywall texture, also sold as California knockdown or splatter drag.
- Knockdown ceiling: $1.00 to $2.50 per square foot, or $500 to $1,250 for 500 square feet (HomeGuide)
- A heavier knockdown hides more flaws, seams and uneven spots
Orange Peel Sprayed to Blend
Orange peel is a light, dimpled texture, like the skin it's named after. It's sprayed with a pump that pushes thinned compound through a nozzle, and HomeGuide notes that the nozzle and sprayer type set the pattern. Ask how far past the edges of the patch the spray will go. Sprayed textures cost $0.80 to $1.50 per square foot installed. If you'd rather try it yourself, HomeGuide lists texture-sprayer rental at $75 to $95 a day.
Hand-Troweled and Skip-Trowel Finishes
Skip trowel goes on in a thin layer with a knife or trowel held at a slight angle, which leaves raised, random curves. Other hand textures include hawk and trowel, Santa Fe, stomp or slap brush, crow's foot, rosebud, swirl and comb. HomeGuide notes they take more skill, experience and time, and prices them at $1.50 to $2.00 per square foot against $0.80 to $1.50 for sprayed ones.
Smooth Walls With No Texture to Hide Behind
A smooth wall has nothing to break up a patch, and HomeGuide points out that light shining across a smooth surface picks out every flaw. Matching here is a finishing job, not a texture job: the patch has to be flat to the wall, which is a question of finish level and coats. If you're tired of fighting an old texture, the other route is to skim coat the wall smooth.

Retexturing a Whole Wall So Nothing Shows
HomeGuide prices a full retexture, including removal of the old texture, at $1.80 to $3.80 per square foot. It's worth pricing when several patches sit on one wall.

Why Kent homeowners, landlords and businesses call Drywall Repair Kent
- Your request goes to one independent local drywall contractor, not a bidding list
- The referral is free, and booking is up to you
- Ask for the finish level, texture and paint as separate lines
- Check L&I registration and bond before work starts
- Keep the deposit small and pay as the coats are finished
Paint Is Half the Match
A good texture match under paint that doesn't match still shows. HomeGuide says freshly textured surfaces need a primer coat before paint. That's why texture repairs are often quoted with paint as a separate line, as in the blending figures at the top of this page. Painting the whole room runs $1 to $3 per square foot of surface in HomeGuide's interior painting range.
If you still have the leftover paint or its color code, say so in your request; it can save the contractor a trip to match a sample. Ask for two prices: a touch-up around the patch and paint on the full wall.
All the numbers on this page are national cost-guide figures gathered from jobs across the country. Treat them as a yardstick, and take the written quote from the contractor who has seen your wall as the real price.
One check before anyone sands or scrapes an old texture: textured paints and patching compounds are among the materials EPA lists as possible asbestos sources, and King County's air agency wants a survey before renovation work. The asbestos survey rule explains who can do it.
